Large Digital Screen Control with Easy SYN Mode
- Effortless SYN Control
- 10 Customizable Presets
- Clear, Accurate Data Display
- Safety Color Alerts
Arccaptain
FR Balaclava Full Face Mask for Welding Work
SAVE $3.00 (13% OFF)
FLASH SALE SAVINGS
Sale ends in:
00
Days
:
00
Hrs
:
00
Mins
:
00
Secs
Arccaptain Protective Gear
FR Balaclava Full Face Mask for Welding
Whether you're running MIG beads for hours, grinding down welds, or working a full fabrication shift, unprotected skin on your face, neck, and shoulders is a liability. The Arccaptain FR Balaclava is built to eliminate that risk without slowing you down. Soft knitted flame-resistant fabric, optimized mesh ventilation, a three-panel helmet-ready construction, and extended shoulder coverage — all in a balaclava that weighs just 7 oz.
Designed specifically for welders and fabricators who need real protection and all-day comfort, not just a thin neck gaiter that rides up and leaves your shoulders exposed.
Product Features
Built for the Weld. Worn All Day.
Soft, Breathable & Comfortable
Made from soft knitted flame-resistant fabric with optimized mesh ventilation zones, this welding balaclava feels comfortable against your skin from the first hour to the last. Heat and moisture escape through the mesh rather than building up against your face — making long welding and grinding sessions far more manageable.
Lightweight — Only 7 oz
At just 7 oz, you'll barely notice it's there. Delivers reliable warmth and flame protection without the bulk or fatigue of heavier FR hoods. Ideal for year-round use — keeps you warm in a cold winter garage and ventilated enough for a hot summer shop.
3-Panel Helmet-Ready Design
The three-panel head construction sits flat and smooth under auto-darkening welding helmets and hard hats. No bunching at the crown, no pressure points at the forehead — just a clean, secure fit that stays in place from the first strike to the last bead.
Extended Shoulder Coverage
The enlarged shoulder design shields your neck and upper shoulders from sparks, spatter, and grinding debris — the areas most often left exposed by standard balaclavas. Less time adjusting gear, more time welding. Fewer burns on the neck at the end of the shift.
Glasses & Goggle Opening
Dedicated openings for safety glasses and grinding goggles let eyewear users get a clean, comfortable fit without the balaclava riding up or distorting the seal. Works with standard ANSI-rated safety glasses, prescription glasses, and most grinding goggle styles.
Two-in-One Quick Switch
The layered two-in-one look lets you shift quickly between welding, grinding, and general work without removing the balaclava. Mesh ventilation around the mouth improves airflow during active grinding where heat builds fast — reconfigure in seconds for each task.
Designed For
From the Shop Floor to the Job Site
This FR welding hood is purpose-built for anyone working around arc flash, spatter, and abrasive debris on a regular basis.
- MIG & TIG Welders Full-face spark and spatter protection with heat-venting mesh so you stay focused on the puddle, not your comfort.
- Stick & Flux-Core Welders Guards against the heavy spatter that comes with high-amperage stick and flux-core processes — exactly where exposed skin gets burned most often.
- Angle Grinder & Cut-Off Wheel Users Shields the neck, face, and shoulders from abrasive metal debris and grinding sparks without limiting your range of motion.
- Fabricators & Ironworkers Comfortable enough to wear under a hard hat for extended fabrication and ironwork shifts without causing fatigue or heat buildup.
- Home Shop & Garage Welders Lightweight and breathable enough for hobbyist weekend projects — professional-grade protection without the heavyweight price or bulk.
Product Gallery
See Every Detail
Fit Guide
Size Guide (US Standard)
Measure around the widest part of your head — just above the ears and eyebrows — using a soft tape measure. If you fall between sizes, size up for a more relaxed fit under a welding helmet or hard hat.
| Size | Recommended Head Circumference | Fits Head Circumference | Length |
|---|---|---|---|
| S | Up to 22.6 in | 18.9 – 22.8 in | 16.5 in |
| M | Up to 23.4 in | 20.5 – 24.4 in | 17.3 in |
Pro tip: Most welders with a head circumference between 22 and 23 inches prefer the M for a looser fit that doesn't compress under a welding helmet headgear band.
Care Instructions
Keep the FR Rating Intact
Proper laundering is critical for maintaining the flame-resistant properties of the fabric. Follow these guidelines to get the full service life out of your balaclava:
- Machine wash in cold water on a gentle cycle.
- Tumble dry on low heat or air dry flat.
- Do not use bleach or fabric softener — both degrade flame-resistant fiber treatments over time.
- Do not iron directly on the fabric. If pressing is needed, use a low-heat setting with a pressing cloth.
- Inspect for damage, holes, or worn areas before each use. Compromised fabric reduces protection.
Is Welding Too Hard to Learn? Not Anymore!
Welding used to be tough and risky, but with the Arccaptain MIG205MP, it's now easy. This app-controlled, multi-functional welder and cutter is perfect for DIY, workshops, and industrial use. With the app, you can easily adjust settings remotely, giving you full control from your phone. Plus, you can save and recall preset scenes anytime, ensuring your settings are always ready. No more manual tweaks—just tap, set, and weld! Let’s keep the welding tradition alive!
Control Your Welder Like Never Before
Break free with the ARCCAPTAIN MIG205MP! Its large screen and SYN control make welding effortless, while the mobile app empowers you to fine-tune parameters and save your favorite settings for future use. With versatile modes and precision, it’s perfect for all skill levels.
App-Controlled for Convenient Parameter Adjustments
- Easily Adjust Settings Remotely with the App
- Save and Recall Preset Scenes Anytime
- Adjust Settings from Anywhere
All-in-one Multi-Process Welder User-Friendly and Powerful
Master Every Job with Versatile Welding & Cutting Modes
Combining MIG, Pulse MIG, TIG Pulse, MMA, Plasma Cutting, Flux-Cored, and Cleaning in one compact machine, the ARCCAPTAIN MIG205MP offers high-frequency TIG start, foot-pedal control, and efficient cooling for precision and reliability on every job.
Precise Welding, Perfect Result
A Welder for All Your Everyday Tasks
MIG, Pulsed MIG, Gasless MIG & More in One!
MIG205MP offers easy welding with MIG, Pulsed MIG, Gasless MIG, and more. It delivers precise, powerful results for both beginners and professionals, perfect for any welding job.
TIG Welding
Master precision welding with high-frequency TIG start and foot-pedal control. Independent cooling ducts guarantee reliable, long-lasting performance for every job, even under intense use.
Plasma Cutting
Easily cuts through stainless steel, aluminum, copper, and more, providing precise cuts for any project.
MMA Welding
Achieve flawless Stick welding with the ARCCAPTAIN MIG205MP! Its Hot Start and Arc Force provide smooth starts and stable arcs, making it perfect for repairs and DIY projects.
Cleaning Function
It doesn’t just weld and cut—it also features a cleaning function for residue-free finishes and flawless results. For optimal performance, use it with the dedicated welding cleaning agent on every project.